Eurorack Pro
 |
 Behringer RX1202FX Eurorack Pro Rackmount Mixer US $217.99 |
 Behringer Eurorack Pro RX1202FX 12 Input Mic Line Rack Mount Mixer  US $217.99
|
 BEHRINGER EURORACK PRO RX1202FX MUSIC OUTLET US $217.99
|
 Behringer Eurorack Pro RX1602 16 Input Line Mixer NEW US $142.99
|
 Behringer Eurorack Pro RX1602 16 Input Ultra Low Noise Line Mixer US $142.99
|
 Behringer Eurorack Pro RX1602 Line Mixer US $142.99
|
 Eurorack UB1204FX PRO Mixer w Rack Ears Mixing Board US $99.95
|
 Behrigner Mixer Eurorack UB1204 PRO Preamps and Digital Effects US $89.00
|
 Behringer Eurorack UB1222fx pro US $76.00
|
 Behringer Eurorack UB1204 Pro Mixer US $49.99
|
 behringer eurorack RX1602 pro audio save $$$ wholesale best buy ebay EBAY77C US $49.99
|
 BEHRINGER EURORACK UB2442FX PRO MIXER NO RESERVE US $26.00
|
 Eurorack UB1204FX PRO Mixer New US $10.99
|
Mixer to Audio Interface [Cables]?
So I got a new recording studio, sorta.
My audio interface:
http://pro-audio.musiciansfriend.com/product/Lexicon-Alpha-USB-Audio-Interface?sku=245507
My mixer:
http://pro-audio.musiciansfriend.com/product/Behringer-RX1202FX-Eurorack-Pro-Rackmount-12Input-Mixer?sku=631275
My monitors:
http://pro-audio.musiciansfriend.com/product/Edirol-MA15D-Digital-Stereo-Micro-Monitor-Pair?sku=603678
I'm having problems connecting all these together. I've gotten them to work separately. I"m trying to hook my monitors to the mixer, and the mixer to the interface so I can control everything from that mainly, since that's what the software is compatible with [still trying to get Cubase to recognize all these things too, so if you had any input there that'd be appreciated]. I'm not even sure what kind of cables I should use. Any advice?
I have that same interface and it works great!
This is a pretty easy hookup.
Connect the RCA red/white tape outputs on the back of the mixer to the 1/4 inch line inputs on the interface using a pair of RCA to 1/4 inch cables:
http://www.zzounds.com/item--HOSCPR20
Connect the monitors to the headphone jack on the front of the interface using a 1/8 inch to RCA cable.
http://www.adorama.com/HOCMR203.html
This jack allows you to switch between monitoring the input or output of the interface using the mix control on the front of the interface.
Cubase will only recognize the interface.
My new Mixer eurorack pro and 2 amp's Crown xls
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.